0.3mm Diameter Stainless Steel Wire For Making Scourer

Stainless steel wire, also known as stainless steel wire, is a variety of silk products of different specifications and models made of stainless steel. The origin is the United States, the Netherlands, and Japan, and the cross section is generally round or flat. Common stainless steel wires with good corrosion resistance and high cost performance are 304 and 316 stainless steel wires.

Send Inquiry

Chat Now

Description

Technical Parameters

Production Introduction

Name	0.3mm Diameter Stainless Steel Wire For Making Scourer
Steel Grade	200/300/400/duplex series
Diameter	0.13-10.0mm
Package	200-500 kgs each coil
Process	Annealed
Surface	Bright/polish/galvanized
Application	Manufacturing
Main Market	South America,Europe,Mid-East,South-east Asia etc.

Chemical composition:

Common steel grade of stainless steel wire
Grade	Chemical Composition (%)								Mechanieal Performance
Grade	C	Si	Mn	P	S	Ni	Cr	Other	Hardness
201	≤0.15	≤1.00	5.5/7.5	≤0.060	≤0.030	3.5/5.5	16.0/18.0	-	HB≤241,HRB≤100, HV≤240
202	≤0.15	≤1.00	7.5/10	≤0.060	≤0.030	4.0/6.0	17.0/19.0	-	HRB≤195, HV≤218
304	≤0.08	≤1.00	≤2.00	≤0.045	≤0.03	8.0/11.0	18.00/20.00	-	HB≤187,HRB≤90,HV≤200
316	≤0.08	≤1.00	≤2.00	≤0.045	≤0.03	10.00/14.00	16.0/18.0	Mo:2.00/3.00	HB≤187, HRB≤90 HV≤200
316L	≤0.03	≤1.00	≤2.00	≤0.045	≤0.03	10.00/14.00	16.0/18.0	Mo:2.00/3.00	HB≤187, HRB≤90 HV≤200
321	≤0.08	≤1.00	≤2.00	≤0.045	≤0.03	9.00/12.00	17.0/19.0	Ti:5C-0.70	HRB≤90, HV≤200
410	≤0.15	≤1.00	≤1.25	≤0.060	≤0.030	≤0.060	11.5/13.5	-	HB≤183, HRB≤88 HV≤200
430	≤0.12	≤1.00	≤1.25	≤0.040	≤0.03	-	16.00/18.00	-	HB≤183, HRB≤88 HV≤200

Production Process Steps:

Raw material wire-Surface oxide removal (chemical method)-Drawing-heat treatment (solid solution)-Secondary surface oxide pickling-drawing-inspection-packaging-storage.

photobank (15)