What are the factors that affect the shearing quality of stainless steel pipes? The quality of the appearance directly affects the brand image of a company's products. The shearing of stainless steel pipes is a processing procedure performed by many stainless steel sheet manufacturers. It is responsible for sharpening, shearing and marking of stainless steel tubes. Semi-finished products processing management methods, etc., so it is also the last line of defense to improve the quality of products and commodities.
Different shearing processes will have different effects on stainless steel pipes, and the shearing problems of stainless steel pipes can easily lead to quality degradation. Fake and shoddy cutting tools and equipment When purchasing stainless steel pipe cutting equipment and game props, be sure to choose good quality and guaranteed products. Machines and equipment with poor performance indicators will cause problems such as dislocation and burrs after the stainless steel pipe is cut. Use unscientific edge clearance. When shearing the stainless steel pipe, it should be adjusted according to the various ground stresses of the stainless steel pipe.
The cutting edge clearance affects the shear force of the cutting edge and the service life of the cutting edge. The void will lead to an increase in the burr of the stainless steel tube, resulting in a secondary shear section. Excessive trim is not cut to the design scheme. When shearing stainless steel pipes, many processors will over-cut according to the specifications and structural requirements, which will cause the stainless steel pipes to be damaged by ground stress and may also damage the specifications of the stainless steel pipes.