304 stainless steel plate is generally polished and polished during the production process, and only a few products, such as electric water heaters, vertical water dispenser linings, etc., do not need polishing and polishing. Thus, the raw material has excellent grinding and polishing properties. The biggest damage to the grinding and polishing performance is the defect of the surface layer of the raw material. It is difficult to solve the problems of 304 stainless steel plates such as scratches, scratches, and soaking of materials. The strength of this product is too low, and it is not easy to grind during the grinding and polishing process (BQ is not very good).
The surface morphology and application possibilities of 304 stainless steel plate are diversified; it has good corrosion resistance, has a longer service life than ordinary steel, and has higher corrosion resistance and compressive strength, so it is possible to use large steel plates; high temperature compressive strength, It can be fireproof; it is easy to make plastic pellets in indoor production and processing; because there is no surface treatment, the maintenance is simple; the cleaning and smoothness are high; it has excellent welding performance.
The 304 stainless steel plate is applied to indoor air drying, and the 304 stainless steel is selected, and the actual effect is very good. However, in the countryside and large cities, it is necessary to maintain its appearance, and usually requires cleaning. In industrial enterprises and coastal cities, in places with heavy environmental pollution, the surface layer will be very dirty and even lead to rust. However, to take advantage of the beauty of the outdoor environment, nickel-containing stainless steel is required. Therefore, 304 stainless steel plates are generally used for building curtain walls, side walls, roofs and other basic constructions, but in industrial production, the corrosion is more serious or the deep sea air corrosion is more serious, so 316 stainless steel needs to be selected.